SODA VENDING MACHINE PARTS
NEW, USED & REFURBISHED

Sorry but there is now a $20.00 minimum for all parts orders... Not including S&H
( Unless otherwise specified in the item description )


PLEASE READ BEFORE CALLING  !!!
   
I stock most parts for Dixie Narco machines... lots of used parts and some new parts and most new parts are easily available. 

I stock some used parts for later model Vendo machines and most new parts are available.

I do have a few used parts for Royal, older Vendo and Cavalier machines... any parts that I have for these
 machines will be listed on this page and if the parts that you need for these machines are not listed on this page then
I do not have them nor do I know where to get them.
Sorry for seeming so rude... but I normally get 3-4 calls per day from people who purchased these 30- 50 year old
machines looking for parts that are no longer available and although they either did not want to take the time to look
 on this page to see if I had their part or they did look and did not see it listed on this page they still call. This wastes
 both of our time... not to mention that half of them are now mad at me because I do not know where to get their part. 
Please... if you don't see the part that you need for these older machines on this page
then I don't have them and I don't know where to get them.
 
  

NOTICE  !!! 
Please... you need to know the make and model of your machine before calling looking for parts.
Calling and telling me that it looks like one of the machines on my website or one of my ads does not help.
This is like telling an auto parts company that you need a part for your red car... you need the make and model.
ID tags are usually located on the left side of the machines door about half way down from the top and on the cooling
 deck plate right in front of the condensor coil. If the tags are gone and it is a coke, pepsi etc... branded machine they
 usually write the model number in black marker at the top of the inner door.

 
Vending machines are like cars... you need to know the exact make and model before ordering parts for it. You can not order
 a part for an 8 cylinder Ford and expect it to fit on your 6 cylinder Chevy just because they are both red. Vending machines
 are the same way... you can not order a part for a Dixie Narco and expect it to fit your Vendo just because it says coke on the front.  
 I will help you out as best as I can with the information that you provide me but if you simply guess at what your machine is because
 it "looks like one of the machines on my website" (which is the most common quote that I hear from customers) or that you "simply don't
have the time to go look for the ID tag" (which is the second most common quote I hear) you are running the risk of ordering the wrong parts. 
 
 
 
 

Sales of all parts new or used are final and no returns or exchanges will be accepted.



      Sorry... but I do not keep normal business hours. I am in and out of the shop all of the time running
route or making machine deliveries but if you are local I will be glad to meet you when I am here.
   
Not local ?...  I ship parts nationwide via USPS priority mail 2-3 day service w/ delivery
confirmation (except cooling units) and can take your credit or debit card payment over the phone.
I can also ship all over the world but payment must be made via western union.

 I turn this phone on no later than 4:00 AM every day so please feel free to call anytime... including weekends...

623-340-0296

 Sorry but due to the following reasons... and more... 
 All parts sales are final and no returns or exchanges will be accepted for any reason.

#1 main reason... I realize that most folks have no idea what they are doing when trying to fix their own machines
 and most often they simply guess at what their problem is because of what they heard from someone else or read online.
 MANY times this results in them ordering the wrong part or a part that they thought they needed when in reality
that part was not their problem to begin with so they say that my part does not work and want to return it for a refund.
All of my parts are checked for proper operation when they are removed from the machines and then checked once again
 prior to shipping so I am not responsible if you ordered the wrong part or my part does not fix your problem.

#2 main reason...
 If you have electrical issues with your machine... and many do... as soon as you plug one of my
perfectly good working parts (especially boards, coin mechs and dollar bill acceptors etc...) into your miswired or
 shorted out machine it could damage my part and then you want to return it for a refund saying that it does not work.


#3 main reason... I have had a few folks out there who ordered parts, then sent them back wanting a refund saying that
 they were bad and when I inspected them I discovered that they were not the parts that I actually sold them... they simply
 kept my good parts and sent back their bad parts trying to get a refund resulting in them getting a free replacement part.
I know this to be true on several occasions because I mark all used parts that I sell.

THEREFORE...

All used parts are sold in as is tested and working condition and I do not offer any kind of warranty. 
Refurbished coin mechanisms and dollar bill acceptors by a factory authorized service
 center have a 60 day warranty from the service center.
Rebuilt cooling units by a refrigeration certified service tech have a 30 day warranty (local only).

 
  One more thing... these are all USED parts unless otherwise specified, and as used parts they may not look exactly like 
new parts cosmetically. They can show some wear and tear from being used parts. Just like a used car... it may have cosmetic blemishes but it will work just fine. I test them thoroughly for proper operation but if you are looking for a part
 that is cosmetically perfect then you need to buy a new part.

Unfortunately due to a few dishonest folks out there... plus those folks who do not want to be bothered with finding out what make and model machine they actually have or what part they actually need or those who are going to knit pick about every little blemish on their
 used part... I have been forced to adopt this all sales final... no return or exchange policy.

 By purchasing any used parts from High Desert via credit or debit card you authorize your card
 issuer to process any payments made to High Desert for said parts and that you understand
 and agree that all sales are final, that these parts are sold in as is condition with no warranty
 expressed or implied, that there are no refunds or exchanges allowed and that you also agree
 to give up the right to dispute any charges made for said parts for any reason at all.

 If you do not understand or agree with this no warranty, no return and no exchange policy
 Please do not order any parts from High Desert.



Sorry but there is now a $20.00 minimum for parts orders... Not including S&H
( Unless otherwise specified in the item description )

 
 
****************************************************************************************
NOTICE !!!
Coke & Pepsi are now scrapping all of their used machines in order to keep them
 off the market so I am no longer stripping machines for the parts and as I start
 running out of used parts I will only be offering refurbished and new parts.

Cooling units
Sorry but complete used cooling units are no longer available.
If you are local and want a new compressor job done then I can refer you to
an honest refrigeration certified tech who can to a proper job for you.
He can come out to you or you can take your cooling unit to him.
  

 
 Sign fronts
  Sorry but used Coke & Pepsi branded sign fronts are no longer available and new
Coke & Pepsi sign fronts are not available to the public per copy wright laws.
Generic sign fronts are available from sources such as NBS or Screen Art.


 
****************************************************************************************
 

Coin mechanisms and dollar bill acceptors

 
Sorry but used coin mechanisms, dollar bill acceptors and harnesses are no longer available.
I have a few used coin mechanisms left in stock (which are listed below) but from now on only
new or refurbished coin mechanisms, bill acceptors & new harnesses will be available.
Refurbished units are refurbished by a Coinco or Mars factory trained service center.
 
 Local customers... if you wish to pick up coin mechanisms or dollar bill acceptors here at my
shop I will be happy to put them on a tester and show you that they do work properly before
you buy. Mail order customers... I thoroughly test all units when they come from the service center
and retest all units once again just prior to shipping.



Coin Mechanisms For Single Price Soda Machines 


 
coinco_sp_coin_mech
Part number... CM-COINCO-SP
Single price coin mechanism 
Coinco 110V coin mechanism (8 pin) for single price soda and beverage machines.
This coin mechanism will fit all name brand single price machines such as Dixie Narco, Vendo,
 Royal. and some USI, Choice Vend, Cavalier, Rock Ola, Westinghouse etc...
These units are refurbished by a factory trained and authorized service center.
Factory refurbished
$150.00  
 
If you are local I will be happy to demonstrate that they do work properly before you buy.

 
Shipping & handling for one coin mech via USPS priority mail large flat rate box
w/ delivery confirmation to U.S. destinations is $24.95.



coin_mech_mars_TRC6800H_s-p
Part number... CM-MARS-SP
Single price coin mechanism
Mars110V coin mechanism (8 pin) for single price soda and beverage machines.
This coin mechanism will fit all name brand single price machines such as Dixie Narco, Vendo,
 Royal. and some USI, Choice Vend, Cavalier, Rock Ola, Westinghouse etc...
These units are refurbished by a factory trained and authorized service center.
Factory refurbished
$175.00
If you are local I will be happy to demonstrate that they do work properly before you buy.

 Shipping & handling for one coin mech via USPS priority mail large flat rate box
w/ delivery confirmation to U.S. destinations is $24.95.



Coin Mechanisms For Multi Price  (MDB) Soda & Snack Machines



coinco_mp_coin_mech
Part number... CM-COINCO-MP

Coinco 9302-GX  MDB 34V coin mechanism for multi price soda, beverage & snack machines.
This coin mechanism will fit all name brand MDB soda & snack machines
such as Dixie Narco, Vendo, Royal, Automatic Products etc...
These units are refurbished by a factory trained and authorized service center.
Factory Refurbished
 $175.00 
If you are local I will be happy to demonstrate that they do work properly before you buy.

Shipping & handling for one coin mech via USPS priority mail large flat rate box
w/ delivery confirmation to U.S. destinations is $24.95.



coin_mech_Mars_C7000
Part number... CM-MARS-7000-MP
 Mars CF 7000 series 24V coin mechanism for multi price soda and beverage machines.
Has a much higher coin capacity for use with dollar bill acceptors that accept $5.00 bills.
This coin mechanism will fit all name brand MDB machines
such as Dixie Narco, Vendo, Royal, Automatic Products etc... 
 
 These units are refurbished by a factory trained and authorized service center.
Factory Refurbished
 $225.00 
If you are local I will be happy to demonstrate that they do work properly before you buy.

  Shipping & handling for one coin mech via USPS priority mail large flat rate box
w/ delivery confirmation to U.S. destinations is $24.95.



coin_mech_mars_4000_mp 
Part number... CM-MARS-4000-MP
Mars Series 4000 VN4510 MDB 34V coin mechanism for multi price soda, beverage & snack machines.
This coin mechanism will fit all name brand MDB soda & snack machines
such as Dixie Narco, Vendo, Royal, Automatic Products etc...
These units are refurbished by a factory trained and authorized service center.
Factory Refurbished
 $225.00 
If you are local I will be happy to demonstrate that they do work properly before you buy.

Shipping & handling for one coin mech via USPS priority mail large flat rate box
w/ delivery confirmation to U.S. destinations is $24.95.




coin_mech_mars_6512_mp
Part number... CM-MARS-6512-MP
Mars TRC 6512 MDB 34V coin mechanism for multi price soda, beverage & snack machines.
This coin mechanism will fit all name brand MDB soda & snack machines
such as Dixie Narco, Vendo, Royal, Automatic Products etc...
These units are refurbished by a factory trained and authorized service center.
Factory Refurbished
 $225.00 
If you are local I will be happy to demonstrate that they do work properly before you buy.

Shipping & handling for one coin mech via USPS priority mail large flat rate box
w/ delivery confirmation to U.S. destinations is $24.95.




coin_mech_coinco_9302LF_15_pin
Part number... CM-COINCO-15PIN
Used in good working condition
Coinco 9302-LF coin mechanism (15 pin) 24V for multi price soda, beverage & snack machines.
This coin mechanism will fit all 15 pin name brand soda & snack machines
such as Dixie Narco, Automatic Products etc...
Used but thoroughly tested for proper operation before removal from
machines and then will be retested once again prior to shipping.
$100.00
( I have 8 of these in stock )
 

Factory Refurbished
 These units are refurbished by a factory trained and authorized service center.
$200.00


Shipping & handling for one coin mech via USPS priority mail large flat rate box
w/ delivery confirmation to U.S. destinations is $24.95.



coin_mech_coinco_9300L_12_pin
Part number... CM-COINCO-12PIN
Coinco 9300-L coin mechanism (12 pin) 117V for multi price soda, beverage & snack machines.
This coin mechanism will fit all 12 pin name brand soda & snack machines
such as Dixie Narco, Vendo, Royal, Automatic Products etc...
These units are refurbished by a factory trained and authorized service center.
Factory Refurbished
 $200.00 
If you are local I will be happy to demonstrate that they do work properly before you buy.

Shipping & handling for one coin mech via USPS priority mail large flat rate box
w/ delivery confirmation to U.S. destinations is $24.95.



    
Dollar Bill Acceptors For Single Price Soda Machines


BA_mars_sp 
Part number... BA-MARS-SP

Mars 2500 series 110V dollar bill acceptor for single price soda and beverage machines.
This coin mechanism will fit all name brand single price machines such as Dixie Narco, Vendo,
 Royal, some USI, Choice Vend, Cavalier, Rock Ola etc...
These units are refurbished by a factory trained and authorized service center.
Factory Refurbished
 $175.00... without harness
$241.00... with both harnesses needed...   (shown below)
 
If you are local I will be happy to demonstrate that they do work properly before you buy.

  Shipping & handling for one bill acceptor via USPS priority mail w/ delivery confirmation
to U.S. destinations runs between $15.95 & $20.95 depending on destination zip code.



BA_harness_mars_sp
Part number... HAR-MARS-SP
Dollar bill acceptor harness for Mars single price machines
These are the harnesses needed to connect the Mars dollar bill acceptor
 and the coin mechanism to the machine.
NEW
T-blocker harness (top)... $40.00
Bill acceptor harness (bottom)... $26.00



BA_coinco_sp
Part number BA-COINCO-SP
Coinco BA30 dollar bill acceptor for single price soda and beverage machines.
This coin mechanism will fit all name brand soda & snack machines such as Dixie Narco, Vendo,
 Royal, some USI, Choice Vend, Cavalier, Rock Ola etc... 
 
Factory Refurbished
 These units are refurbished by a factory trained and authorized service center.
$160.00... without harness
$200.00...
with harness...   (shown below)

If you are local I can demonstrate that they do work properly before you buy.

 
Shipping & handling for one bill acceptor via USPS priority mail w/ delivery confirmation
to U.S. destinations runs between $15.95 & $20.95 depending on destination zip code.



BA_harness_coinco_sp
Part number HAR-COINCO-SP
Dollar bill acceptor harness for coinco single price machines
These are the harnesses needed to connect the Coinco dollar bill acceptor
 and the coin mechanism to the machine.
NEW
T-blocker harness... $40.00



Dollar Bill Acceptors For Multi Price (MDB) Soda & Snack Machines


  BA_mars_sp
Part number BA-MARS-MP
Mars 2500 series 24V dollar bill acceptor for multi price soda, beverage & snack machines.
This coin mechanism will fit all name brand MDB soda & snack machines such as Dixie Narco,
Vendo & Royal, Automatic Products etc....
Factory Refurbished
 These units are refurbished by a factory trained and authorized service center.

$1.00 bill only capable
$175.00...
without harness
$201.00... with new harness...   (shown below)

$1.00, $2.00 & $5.00 bill capable
$225.00... without harness
$251.00... with new harness...   (shown below)

 If you are local I can demonstrate that they do work properly before you buy.

 
Shipping & handling for one bill acceptor via USPS priority mail w/ delivery confirmation
to U.S. destinations runs between $15.95 & $20.95 depending on destination zip code.


BA_harness_mars_mp
Part number HAR-MARS-MP
Dollar bill acceptor harness for Mars multi price (MDB) machines
These are the harnesses needed to connect the MDB dollar bill acceptor
 and the coin mechanism to the machine.
NEW
$26.00


  BA_coinco_sp
Part number BA-COINCO-MP
Coinco BA30 dollar bill acceptor for multiprice (MDB) soda, beverage & snack machines.
This coin mechanism will fit all name brand soda & snack machines such as Dixie Narco, Vendo,
 Royal. Choice Vend, Cavalier, Rock Ola, Automatic Products etc... 
 
Factory Refurbished
 These units are refurbished by a factory trained and authorized service center.
$160.00... without harness
$186.00... with new harness...  (shown below)

If you are local I can demonstrate that they do work properly before you buy.

 
Shipping & handling for one coin mech or bill acceptor via USPS priority mail w/ delivery confirmation
to U.S. destinations runs between $15.95 & $20.95 depending on destination zip code.



BA_harness_coinco_mp
Part number HAR-COINCO-MP
Dollar bill acceptor harness for coinco multi price (MDB) machines
These are the harnesses needed to connect the MDB dollar bill acceptor
 and the coin mechanism to the machine.
NEW
$26.00


****************************************************************************************

Shim kits for Dixie Narco & Vendo soda machines
For converting individual columns to vend 12 oz cans, 16oz cans or 20oz bottles

Sorry but there is now a $20.00 minimum for parts... Not including S&H
( Unless otherwise specified in the item description )


 
 
Dixie Narco E Series Multiprice Soda Machine Shim Kits
Models... 276E, 501E, 522E, 600E
  

shims_501E_ wide _12oz_can
Part number SH1
Shim to convert the wide column in a Dixie Narco E- model multiprice machine to vend 12 oz cans.
Requires 8 total per column... (4 per side)
I will also include instructions on how to set up the column back spacer,
  and cam on the vend motor.
May be new, used or a combination of both
$3.75 ea
 ( I have many in stock at this time )
 
  Shipping and handling for one shim via USPS priority mail large flat rate box
 w/ delivery confirmation to U.S. destinations runs $16.95.
( I can ship up tp 24 shims in one box and S&H can run up to $21.95 depending on how many shims shipped )


Part number SH2
Shim to convert the wide column in a Dixie Narco E- model multiprice machine to vend 16 oz cans.
Requires __ total per column... (__ per side)
I will also include instructions on how to set up the column back spacer,
  and cam on the vend motor.
May be new, used or a combination of both
$3.75 ea
 ( I have many in stock at this time )
 
  Shipping and handling for one shim via USPS priority mail large flat rate box
 w/ delivery confirmation to U.S. destinations runs $16.95.
( I can ship up tp 24 shims in one box and S&H can run up to $21.95 depending on how many shims shipped )


Part number SH3
Shim to convert the wide column in a Dixie Narco E- model multiprice machine to vend 20 oz bottles.
Requires __ total per column... (__ per side)
I will also include instructions on how to set up the column back spacer,
  and cam on the vend motor.
May be new, used or a combination of both
$3.75 ea
 ( I have many in stock at this time )
 
  Shipping and handling for one shim via USPS priority mail large flat rate box
 w/ delivery confirmation to U.S. destinations runs $16.95.
( I can ship up tp 24 shims in one box and S&H can run up to $21.95 depending on how many shims shipped )




Dixie_E-model_12_oz_can_shim
Part number SH4
Shim to convert the narrow column in a Dixie Narco E- model multiprice machine to vend 12 oz cans.
Will fit Dixie Narco 276E, 501E & 600E model machines.
Requires one per column (right side).
I will also include instructions on how to set up the column back spacer,
 rod & spring assembly and cam on the vend motor.
May be new, used or combination of both.
$12.00 ea
( I have many in stock at this time ) 
 Shipping and handling for one shim via USPS priority mail large flat rate box
 w/ delivery confirmation to U.S. destinations runs $16.95. 
( I can ship up tp 10 shims in one box and S&H can run up to $21.95 depending on how many shims shipped )



  Dixie_E-model_20_oz_bottle_shim
Part number SH5
Shim to convert the narrow column in a Dixie Narco E- model multiprice machine to vend 20 oz bottles.
Will fit Dixie Narco 276E, 501E & 600E model machines.
Requires one per column (right side).
I will also include instructions on how to set up the column back spacer,
  and cam on the vend motor.
Shims may be new, used or combination of both.
$4.00 ea
( I have many in stock at this time ) 
  Shipping and handling for one shim via USPS priority mail large flat rate box
 w/ delivery confirmation to U.S. destinations runs $16.95. 
( I can ship up to 10 shims in one box and S&H can run up to $21.95 max depending on how many shims shipped )



 
Rod & spring assy to go along with Dixie Narco E-model machine can shims
May be new, used or a combination of both

$4.25 ea.




 
Vendo Multiprice Soda Machine Shim Kits
Models V480, 570 etc...

Vendo_12_oz_can_shim_and_clip_set
Part number SH8
Shim and gauge bar clip set to convert one single column in a Vendo multiprice machine to vend 12 oz cans.
Will fit Vendo multiprice machines such as the Vendo 480 & Vendo 570 model machines.
Requires one shim and two white gauge bar clips per column .
Shims and clips may be new, used or combination of both.
One set consists of one shim and two gauge bar clips (white).
Also includes instruction sheet on how to properly install this shim kit.
$16.00 ea set
( I have many in stock at this time ) 
  Shipping and handling for one shim via USPS priority mail large flat rate box
 w/ delivery confirmation to U.S. destinations runs $16.95. 
( I can ship up tp 10 shims in one box and S&H can run up to $21.95 max depending on how many shims shipped )



Vendo_16_oz_can_shim_and_clip_set
Part number SH9
Shim and gauge bar clip set to convert one single column in a Vendo multiprice machine to vend 16 oz cans.
Will fit Vendo multiprice machines such as the Vendo 480 & Vendo 570 model machines.
Requires one shim and one gray gauge bar clip (or one black clip w/ the rubber riser cut off) per column .
Shims and clips may be new, used or combination of both.
One set consists of one shim and one gauge bar clip (grey clip or black clip w/ riser trimmed off).
$14.00 ea set
Also includes instruction sheet on how to properly install this shim kit.
( I have many in stock at this time ) 
 
 Shipping and handling for one shim via USPS priority mail large flat rate box
 w/ delivery confirmation to U.S. destinations runs $16.95. 
( I can ship up tp 10 shims in one box and S&H can run up to $21.95 max depending on how many shims shipped )



Vendo_20_oz_bottle_shim_and_clip_set
Part number SH10
Shim and gauge bar clip set to convert the single column in a Vendo multiprice machine to vend 20 oz bottles.
Will fit Vendo multiprice machines such as the Vendo 480 & Vendo 570 model machines.
Requires two shims and one black clip per column.
Shims and clips may be new, used or combination of both.
One set consists of two shims and one gauge bar clip (black w/ riser).
$14.00 ea set
Also includes instruction sheet on how to properly install this shim kit.
( I have many in stock at this time ) 
 
 Shipping and handling for one shim via USPS priority mail large flat rate box
 w/ delivery confirmation to U.S. destinations runs $16.95. 
( I can ship up tp 10 shims in one box and S&H can run up to $21.95 max depending on how many shims shipped )



 
****************************************************************************************

Thermostats
All thermostats are tested to insure proper operation before removal from machines
 
Sorry but there is now a $20.00 minimum for parts... Not including S&H
( Unless otherwise specified in the item description )



 
thermostats
Thermostats
I have thermostats for Dixie Narco single price, multiprice and E model machines.
These were removed from fully functioning machines.
$20.00 ea
( I have several of each style in stock at this time )
Shipping cost via USPS priority mail small flat rate box w/ delivery confirmation
to U.S. destinations is $6.95 ( can ship up to two thermostats for the same price )


****************************************************************************************

Vend motors
All vend motors we
re tested to insure proper operation before removal from machines.
 Local customers... if you wish to pick up motors here at my shop I will be
happy to show you that they do work properly before you buy.
 Mail order customers... I  retest all motors once again prior to shipping.

Sorry but there is now a $20.00 minimum for all parts orders... Not including S&H
( Unless otherwise specified in the item description )


  

vend_motors_dixie
Used Dixie Narco single price machine vend motors
I have both single column and double column motors that will fit both two can deep and three can deep
single price and multiprice machines such as the Dixie Narco DN180, DN 276, DN 320, DN 360, DN 368,
DN 440, DN 501, DN 522, DN 600 & DN 630
All motors are tested for proper operation before removal from
machines and then retested once again prior to shipping.
$30.00 ea
 ( I have a few of each style in stock at this time )
Brand new factory motors
$69.00 ea
( plenty of both single and double column motors available )

 Shipping cost via USPS priority mail w/ delivery confirmation to U.S. destinations
for one motor will run between $10.95 & $14.95 depending on destination zip code
( can ship up to 3 motors for $14.95)


vend_motors_dixie_501E_600E
Dixie Narco  E model multiprice machine vend motors
Double column (red cam) & single column (brown cam) vend motors removed from working late model 600E
machines that fit DN 276E, DN 501E & DN 600E
 All motors are tested for proper operation before removal from
 machines and then retested once again prior to shipping.
Used motors
$45.00 ea
( I have 3 used single column vend motors in stock at this time )
( I have 1 used double column motors in stock at this time )
Brand new factory motors
$84.00 ea
( plenty of both single and double column motors available )
Shipping cost via USPS priority mail w/ delivery confirmation to U.S. destinations
for one motor will run between $10.95 & $14.95 depending on destination zip code
( can ship up to 3 motors for $14.95)



 



vend_motors_vendo_vmax
Part number... VENDO-VMAX-VM
Used Vendo V Max vend motors. 
All motors are tested for proper operation before removal from
 machines and then retested once again prior to shipping.
  $30.00 ea. 
( I have 18 of these in stock at this time )
Shipping cost via USPS priority mail w/ delivery confirmation to U.S. destinations
for one motor will run between $10.95 & $14.95 depending on destination zip code
( can ship up to 3 motors for $14.95)


vend_motor_royal_redbull
Part number... ROYAL372
Used Royal 372 Red Bull machine vend motors. 
All motors are tested for proper operation before removal from
 machines and then retested once again prior to shipping.
839-032-001... ( part number of motor )
  $30.00 ea. 
 ( I have 8 of these in stock at this time )
Shipping cost via USPS priority mail w/ delivery confirmation to U.S. destinations
for one motor will run between $10.95 & $14.95 depending on destination zip code
( can ship up to 8 motors for $14.95)



vend_motor_royal
Part number... ROYAL-SP-VM
Used Royal single price machine vend motors.
These are for two can deep machines.
 All motors are tested for proper operation before removal from
 machines and then retested once again prior to shipping.
$35.00 ea. 
( I have 5 of these in stock at this time )
Shipping cost via USPS priority mail w/ delivery confirmation to U.S. destinations
for one motor will run between $10.95 & $14.95 depending on destination zip code
( can ship up to 3 motors for $14.95)



vend_motor_old_vendo
Part number... VENDO-OLD-SP-VM
Used Vendo (old style) single price machine vend motors.
These are for two can deep machines.
Left motor (white cam) is single column and right motor (green cam) is double column.
All motors are tested for proper operation before removal from machines
and then retested once again prior to shipping. 
  $35.00 ea. 
( I have 3 single column and 2 double column motors in stock at this time )
Shipping cost via USPS priority mail w/ delivery confirmation to U.S. destinations
for one motor will run between $10.95 & $14.95 depending on destination zip code
( can ship up to 3 motors for $14.95)

****************************************************************************************

Condenser & evaporator fan motors, blades and brackets
All fan motors were tested to insure proper operation before removal from machines.
 Local customers... if you wish to pick up motors here at my shop I will be
happy to show you that they do work properly before you buy.
 Mail order customers... I  retest all motors once again prior to shipping.


Sorry but there is now a $20.00 minimum for all parts orders... Not including S&H
( Unless otherwise specified in the item description )



fan_motor_evap
Part number... FAN MOTOR A
Used evaporator or condensor fan motor. 
( Will fit rear three hole mounting brackets only )
These motors were used in most Vendo and some Dixie Narco machines but will fit many others.
Dimensions: 3 3/8" dia... 3 3/8" deep...
Has 3 hole rear mount only 2 3/8" center to center.
All motors are tested for proper operation before removal from
machines and then retested once again prior to shipping.
$30.00 ea.
( I have 8 of these in stock at this time )
Shipping cost via USPS priority mail w/ delivery confirmation to U.S. destinations 
will be between $10.95 & $13.95 depending on destination zip code.


Part number... FAN MOTOR B
Used evaporator or condensor fan motor. 
( Will fit rear three hole or bottom four hole mounting brackets )
These motors were used in most Vendo and some Dixie Narco machines but will fit many others.
Dimensions: 3 3/8" dia... 3 3/8" deep...
Has 3 hole rear mount only 2 3/8" center to center.
All motors are tested for proper operation before removal from
machines and then retested once again prior to shipping.
$30.00 ea.
( I have 8 of these in stock at this time )
Shipping cost via USPS priority mail w/ delivery confirmation to U.S. destinations 
will be between $10.95 & $13.95 depending on destination zip code.



fan_motor_condensor
Part number... FAN MOTOR C
Used condensor or evaporator fan motor. 
(Will fit both rear three hole or bottom four hole mounting brackets)
These motors were used in most Dixie Narco & Vendo machines but will fit many others.
Dimensions: 3 3/8" dia... 3 3/4" deep...
Has 3 hole rear mount 2 3/8" center to center & 4 hole bottom mount.
All motors are tested for proper operation before removal from
machines and then retested once again prior to shipping.
$30.00 ea.
( I have 18 of these in stock at this time )
Shipping cost via USPS priority mail w/ delivery confirmation to U.S. destinations 
will be between $10.95 & $13.95 depending on destination zip code.

 

 
Dixie_cond_fan_blade_only
Dixie Narco condensor motor fan blade only (used).
Condensor bades measure 8 1/2" in dia.
Will fit all Dixie Narco machines... DN180, DN 240, DN 276, DN 320, DN 360, DN 368,
DN 440, DN 501, DN 522, DN 600 & DN 630. Will also fit some Royals and other machines using
the 8 1/2" fan blade design. 
$10.00 ea.
( I have 8 of these in stock at this time )
 

 

Dixie_evap_fan_blade_only
Dixie Narco evaporator motor fan blade only (used).
Evaporator blades measure 7 1/2" in dia.
 Will fit all Dixie Narco machines... DN180, DN 240, DN 276, DN 320, DN 360, DN 368,
DN 440, DN 501, DN 522, DN 600 & DN 630. Coke branded DN 501 machines with the
wide evaporator coil will require two of these fan blades but I can sell only one if needed.

$10.00 ea.
   

 
 
Vendo condensor fan motor set.



Vendo condensor motor only.


 
Vendo condensor motor blade only.




****************************************************************************************

 
 MISC 
Locks, credit relays, sequencers, select buttons, flavor strips, main & display boards, cash boxes etc...

Sorry but there is now a $20.00 minimum for all parts orders... Not including S&H
( Unless otherwise specified in the item description )



  locks
Part number... LOCK-2KEYS
Cylinder lock set (new)
Will fit all Dixie Narco, Vendo, Royal and other soda pop machines...  AP, Rowe,
GPL, USI, National and any other snack vending machine with the T or L handle assembly.
Set includes one brand new lock and two keys.
$16.00 ea
( No minimum order with this part )
( I have many sets in stock at this time )
Shipping cost via USPS priority mail small flat rate box w/ delivery confirmation
to U.S. destinations is $8.95 ( can ship up to eight sets for the same price )


Part number... LOCK-1KEY
Cylinder lock set (used)
Will fit all Dixie Narco, Vendo, Royal and other soda pop machines...  AP, Rowe,
GPL, USI, National and any other snack vending machine with the T or L handle assembly.
Set includes one used lock and one key.
$10.00 ea
( No minimum order with this part )
( I have 4 sets in stock at this time )
Shipping cost via USPS priority mail small flat rate box w/ delivery confirmation
to U.S. destinations is $8.95 ( can ship up to eight sets for the same price )




credit_relay
Part number... DIXIE-CR
Dixie Narco credit relays (used)
Will fit all Dixie Narco single price machines
$15.00 ea
( No minimum order with this part )
( I have many in stock at this time )
Shipping cost via USPS priority mail small flat rate box w/ delivery confirmation
to U.S. destinations is $8.95 ( can ship up to four credit relays for the same price )




credit_relay
Part number... VENDO-CR
Vendo credit relays (used)
Will fit all Vendo single price machines
$15.00 ea
( No minimum order with this part )
( I have many in stock at this time )
Shipping cost via USPS priority mail small flat rate box w/ delivery confirmation
to U.S. destinations is $8.95 ( can ship up to four credit relays for the same price )



sequencer_for_coke_machines
Part number... DN-SEQ
Sequencer for Coca Cola Dixie Narco 7 select machines (used).
Coca Cola made Dixie Narco convert some of their 8 selection machines to 7 selections
so they could use the first two columns as one selection.
Since their is only one selection button to vend product from the first two columns this is
 the sequencer used to toggle between the #1 & #2 colums. 
$20.00 ea
 
( I have several in stock at this time )


Selection Buttons
Sorry but there is now a $20.00 minimum for all parts orders... Not including S&H

( Unless otherwise specified in the item description )



  select buttons_dixie_narco_large
Large square selection button for Dixie Narco soda machines (new)






select buttons_dixie_narco_small
Small selection buttons for Dixie Narco soda machines (New)





Flavor strips
Sorry but there is now a $20.00 minimum for all parts orders... Not including S&H
( Unless otherwise specified in the item description )

New original manufacture plastic screen printed flavor strips for newer style
Dixie Narco, Vendo & Royal machines
Measurements... 1 3/8" tall X 4" wide.
(These are not cheap photo copied or ink jet printed labels that will fade and warp in a couple of months)
coke, diet coke, pepsi, diet pepsi, dr pepper, diet dr pepper, 7-UP, mountain dew,
lipton tea, nestea, minute maid orange, A&W root beer, squirt, sprite, arrowhead 16 oz bottle,
desani 20 oz bottle, aquafina 20 oz bottle, orange gatorade 20 oz bottle, lemon lime gatorade
20 oz bottle, fruit punch gatorade 20 oz bottle, jarritos orange.
$2.00 ea.

New original manufacture plastic screen printed flavor strips for older style
Dixie Narco, Vendo & Royal machines
Measurements... " tall X " wide.
(These are not cheap photo copied or ink jet printed labels)
coke, diet coke, pepsi, diet pepsi, dr pepper, diet dr pepper, 7-UP, mountain dew,
lipton tea, nestea, minute maid orange, A&W root beer, squirt, sprite, arrowhead 16 oz bottle.
 $2.00 ea.





LED sold out lights for Dixie Narco and Vendo can vendors
Used (when available)... $2.00 ea.
New... $4.00 ea.





Cash / coin boxes

Sorry but there is now a $20.00 minimum for all parts orders... Not including S&H
( Unless otherwise specified in the item description )



coin_box
Coin box for Dixie Narco machines and some others (used).
$20.00 ea
( No minimum order with this part )
( I have many in stock at this time )

Shipping cost via USPS priority mail medium flat rate box w/ delivery confirmation
to U.S. destinations is $11.95 ( can ship up to two coin boxes for the same price )
I will need to know what make or model machine you have or the dimensions
of the slot that the coin box fits into.


coin_box_royal_redbull
Coin box for Royal machines (used).
Originally came out of a Red Bull machine.
Dimensions are 8" tall X 5" wide X 4 3/4" deep.
$20.00 ea
( No minimum order with this part )
( I have two in stock at this time )

Shipping cost via USPS priority mail medium flat rate box w/ delivery confirmation
to U.S. destinations is $11.95 ( can ship up to two coin boxes for the same price )


 


 



 



  


 


********************************************************************************************************************
*******************************************************************************************************************
********************************************************************************************************************


 
      



    



   



   



 





  Buy purchase coke coca cola pepsi soda pop snack candy food vending machines used parts for sale and vending services in Phoenix,Tucson, Prescott, Yuma, Flagstaff Arizona.  Vending service in Phoenix Arizona featuring coke coca cola pepsi soda pop snack candy food vending machines used parts either full vending services or vending machines for sale that you can buy yourself. Buy purchase coke coca cola pepsi soda pop snack candy food vending machines used parts to operate yourself without having a vending service in Phoenix, Prescott, Tucson, Yuma, Flagstaff Arizona do it for you and you can put any brand soda pop, snacks, potato chips, candy bars, pastries, food including coke coca cola, pepsi, 7-UP & Kalil products all in the same machine. We also offer vending services where we install machines at your place of business at no charge to you and operate the vending service ourselves if you do not wish to buy or purchase vending machines yourself. We also have vending machines for sale to the Phoenix, Yuma, Tucson, Prescott, Flagstaff Arizona area as well as Colorado, California, New Mexico, Texas, Nevada & Utah.
Used soda vending machine parts, soda vending machine parts, pop vending machine parts, dixie narco parts, vendo vending machine parts,  cooling units, vend motors, coin mechanisms mechs, dollar bill acceptors,   Used soda vending machine parts, cooling units, vend motors, coin mechanisms mechs, dollar bill acceptors,  Used soda vending machine parts, cooling units, vend motors, coin mechanisms mechs, dollar bill acceptors. Dixie Narco DN 180, DN 276, DN 320, DN 360, DN 368, DN 440, DN 501, DN 522, DN 600, DN 630.,
  
Wholesale vending machines, buy truckloads of soda pop vending machines at wholesale pricing, purchase wholesale to the public, used vending machines at wholesale prices, cheap vending machines, inexpensive soda pop vending machines, low low prices on soda pop vending machines, buy right vending machines, cheapest prices on vending machines, 

 This site was last updated on:  7-21-14


Vend Tech © 2008 - Site created by Davin Lavikka